In general, the backup time of commercial UPS battery is not as long as in industrial applications, usually in the 10-30 minutes or so, the charging capacity does not require the capacity increasing design. UPS battery charger is generally designed to be able to back the lead-acid batteries, which back up time is 15-30 minutes, to the capacity of 95% in 8-10 hours.Compared with the commercial UPS, in industrial applications, charging capacity must have higher ability, because the battery backup time from 60 minutes to 8 hours or more, which requires the charger in the UPS system has enough battery recharge capacity. In many cases, the use of backup time for 4-8 hours of battery configuration. In the industrial field of UPS, in order to better adapt to the demand of high and low temperature environment, nickel cadmium batteries have been widely used, in addition to meet the industrial grade UPS charger for lead-acid batteries, also need to meet the charge and discharge characteristics of the nickel cadmium battery.
The main factor of a MPPT Solar charge controller is the comprehensive system of circuit protection function. This is a key role of the controller. The traditional common charge and discharge controller can only be used in general occasions. But the rationality of the design of the protection circuit, the selection of parameters is very important, and the rest is the actual precision of the controller.
Some customers are often found that after a period of time, especially after the continuous overcast and rainy days, the street lamps will be not bright for several days or even several days, while detect the voltage of battery is normal, controller and lights are no fault. This problem has let many developers doubt. Remove of other factors, then comes down to the controller, that is under voltage protection voltage parameters: 1.The value is set too high, the undervoltage recovery for longer time, also caused a lot of days are not light. 2.The parameter setting is reasonable, and the quality or the circuit design or the component selection of the cotroller which resulting in the distortion of the precision, leading to the aberration of the controller.
It is reasonable to set the general over discharge voltage to 12V, and be sure to choose a strong, reliable quality controller. In addition the battery plate configuration must be reasonable, if the daily charging amount of panels can not meet the power, put the battery in the depth of discharge if things often go on like this, life is greatly shortened.
1.The difference of circuit structure Pure online UPS adopts double conversion on-line circuit structure, power input through AC/DC conversion, part of the power to charge the battery, most power converted to alternating current supply load. When the city electricity failure, UPS supply power to the load by the DC/AC conversion. When the UPS fails, it will automatically turn to bypass operation. Online interactive UPS using online interactive circuit structure, the city electrical input through the filter circuit to its surge suppression, filter output to the load, inverter as the charger to charge the battery at this time. When the city electricity failure, Online interactive UPS use the battery power output to the load converted by the DC/AC.
2.The difference of the application On line interactive UPS provides high quality power protection for servers and network equipment. Pure online UPS in addition to the protection of the server and network equipment, but also for the communication system, automatic control equipment. Pure online UPS can also be compatible with cheap fuel generators.
3.Performance. Compared with the online interactive UPS, pure online UPS has a higher performance of the voltage output, zero conversion time and a flexible installation of tower and rack converting.
On line interactive UPS using online interactive design, when supply power to the city power supply, the output voltage change with the market city power; when the city power voltage is too high or too low, the UPS start voltage regulation function, when supply power to the battery, the output voltage is sine wave, the default value is 230VAC, the user can choose 220VAC, 240VAC by software. Pure online UPS using pure online design, whether UPS run on city power or battery power, UPS output sine wave, the default value is 230VAC, the user can choose 220VAC and 240VAC by software.
Output voltage accuracy: When the static state is 1%, while the dynamic state is 5%. Output voltage distortion: When the linear load is less than 3%, the nonlinear load is less than 5%.
When online interactive UPS in the city power failure, the battery power supply has a 2~4ms conversion time,while pure online UPS is 0ms.
Pure online UPS using tower frame type converse installation,which is very flexible, it can be installed in tower form. While increase the rack type conversion accessories, can easily converted into a rack mount UPS.
Many industrial UPS environments, especially in some power generation applications, are likely to be in the higher ambient temperature conditions (>30 degrees) and particulate pollutants in the air. So require the industrial UPS can work in a large number of non conductive dust and high ambient temperature. Work in the ambient temperature which at least 40 degrees, and some occasions even up to 50~55 degrees.
On the contrary, the commercial UPS application environment is almost controlled within 30 degrees, and very clean. The use life of any UPS system will be decreased in a high temperature environment, the key components of the UPS which is the most vulnerable to high temperature environment is the industrial grade UPS components (such as DC capacitor) and the battery. In the high temperature environment may make their life shortened, unless choose high temperature capacitors.
In commercial UPS applications, UPS users may not require a longer service life of UPS. But in the key process control, usually requires UPS to have 15-20 years of life. Industrial UPS system has a built-in design margin, to ensure the actual operating life to meet customer requirements. In addition, industrial UPS equipment will also have a predictable parts replacement program, to ensure that the UPS in the higher average no fault running time over 15-20 years.
Compared with traditional UPS, modular UPS has a considerable advantage. Its advantages are mainly in the following three aspects:
1.Installation is simple, easy expansion, saving investment. A modular type UPS power supply system can make the capacity on demand, with the development of business, and achieve “dynamic growth”. Both to meet the needs of the expansion of the late business, but also to reduce the cost of the user’s initial acquisition.
2.Parallel redundant, stable operation, high reliability. In the rackmount modular UPS, power module is parallel redundancy, each module is equipped with input and output insurance, and input and output relays, any module failure does not affect the work of the whole system. In the traditional UPS products, the security of the user is generally used in the “1+1” or “N+1” parallel redundancy, only one fault tolerant. In the modular UPS system, users only need to buy the corresponding power module to achieve the “N+X” fault redundancy. Modular redundant parallel structure is more reliable than the traditional UPS.
3.Convenient maintenance, on-line processing, high availability. Traditional UPS requires professional personnel to maintenance, while all modules of modular UPS are allowed hot plug, the user can be involved in maintenance, directly replace UPS standby module online. A modular UPS inherits the development of traditional UPS technologies in power device technology and manufacturing process, but the system architecture is based on the multi module parallel system, not only to achieve the hot swap of the system module, and to better handle the relationship between the system module independent operation, mutual cooperation and stable conversion.
SOROTEC can provide professional modular power solutions,high quality and reasonable price,looking forward to get your inquiry.
