The full name of the MPPT solar charge controller is Maximum Power Point Tracking solar controller, is the upgrade products of traditional solar charging and discharging controller. The MPPT controller can detect the generation voltage of the solar panel in real time and track the maximum voltage current value (VI), so that the system can charge the battery with maximum power output. Applied to the solar power system, coordinate the work of solar panels, batteries, and loads, is the brain of solar systems.
The maximum power point tracking system is an electrical system that allows photovoltaic panels to output more power by adjusting the working state of the electrical modules. It can store the direct current generated by the solar panel effectively in the storage battery, which can effectively solve the life and industrial use of electricity in remote areas and tourist areas not covered by the conventional grid, and no environmental pollution.
What is the function of MPPT?
Because of the solar cells influenced by the intensity of the received light and environment and external factors, the output power is changed, the solar power inverter with MPPT is to make full use of solar cells, keep it at the maximum power point, which is the function of MPPT.
PV array is connected with a load through the DC/DC circuit, MPPT device to detect the change of the current and voltage of photovoltaic array, and according to the change of the DC/DC converter PWM drive signal duty cycle adjustment.
For linear circuits, when the load resistance is equal to the internal resistance of the power supply, the power supply has the maximum power output. Although photovoltaic cells and DC/DC conversion circuits are strongly nonlinear, they can be considered as linear circuits in very short periods of time. Therefore, as long as the equivalent resistance of the DC-DC conversion circuit is adjusted, so that it is always equal to the internal resistance of the photovoltaic cell, the maximum output of the photovoltaic cell can be achieved, so the MPPT of the photovoltaic cell is realized.
SOROTEC Solar MPPT Charge Controller 60A 3200W 12/24/48V
1. Intelligent maximum power point tracking technology increases efficiency 25%~30%
2. Compatible for PV systems in 12v, 24v or 48v
3. Three-stage charging optimizes battery performance
4. Maximum charging current up to 60a
5. Maximum efficiency up to 98%
6. Battery temperature sensor (BTS) automatically provides temperature compensation
7. Support wide range of lead-acid batteries including wet, AGM, and gel batteries
8. Multi-function LCD displays detailed information
