Three-phase Balance Active Harmonic Filter(AHF)

  • Three-phase Balance Active Harmonic Filter
  • Three-phase Balance Active Harmonic Filter
  • Three-phase Balance Active Harmonic Filter
  • Three-phase Balance Active Harmonic Filter
  • Three-phase Balance Active Harmonic Filter

Three-phase Balance Active Harmonic Filter(AHF) Functions:

Meeting users’ requirements:
– PF=0.99 and THDi < 5%
– Compensation for 2- to 50-order harmonics
– Capacitive and inductive reactive power compensation
– Three-phase unbalance co


Three-phase Balance Active Harmonic Filter(AHF) Technical Specifications

Active Harmonic Filter
Rated input400V/690V(-20%-+15%)
Power grid frequency50Hz/60Hz ( range: ±10%)
Parallel operationUnlimited
Overall efficiency≥ 97%
Power grid structure3P3L, 3P4L
CT150/5 ~ 10,000/5
Performance indicators
Rated capacity35A/50A/60A/100A/150A
Harmonic compensationAvailable
Reactive power compensationAvailable
Unbalance compensationAvailable
Filtering range2 to 50 orders
Filtering degreeAdjustable from 2 to 50
Filter performanceTHDi< 5%
Overall response time< 10ms
Target power factorAdjustable from -1 to +1
Control algorithmsFFT,Intelligemt, and instantaneous reactive power
Switching frequency20kHz
Noise level< 60dB
Communications and monitoring capabilities
Communications portsRS485,and network port
Communications protocolsTCP/IPPMBus, Modbus, and TCP/IP
Module display interfaceTouch screen
PC softwareOptional
Protection functionsover-valtage protection, under-voltage protection, short-circuit protection, inverter bridge inverse protection,over-compensation protection, and so on
Fault alarmAvailable, at most 500 alarm records
MonitoringIndependent monitoring and centralized monitoring
Mechanical properties
Altitude1% up 1500 m. Between 1500 m to 4000 m, according to GB/T3859.2, the power decreases by 1% for every
additional 100 m.
Operating temperature-10℃ ~ +40℃
Relative humidity5% to 95%, non-condensing
Protection classIP20 (other IP classes are customizable.)


active harmonic filter, active harmonic filter manufacturers, harmonic filter

Please feel free to contact us, your inquiry will be replied within 24 hours.


Active harmonic filter(AHF) related SEO article – Working principle of active harmonic filter

Active harmonic filter uses current transformer to collect current on DC line. After sampling, the obtained current signal is processed by harmonic separation algorithm, and the harmonic reference signal is obtained as a modulation signal. Compared with triangular wave, the switching signal is obtained. The switching signal is used to control the single-phase bridge. According to the principle of technology, the switching signal of the upper and lower arms is connected back, and the harmonic current equal to the harmonic signal on the line and opposite to the harmonic signal on the line can be obtained, and the harmonic current on the line can be cancelled out. This is the feedforward control part. Then the harmonic component of the line current after the access point of the active harmonic filter is fed back as the input of the regulator to adjust the error of the feedforward control.


Generally speaking, it is based on the principle of capacitance with high frequency resistance and low frequency, inductance with low frequency resistance and high frequency. For high frequencies that need to be cut off, the capacitor absorbs inductance and obstructs it. For low frequencies that need to be cut off, the capacitor has the characteristics of high resistance and low inductance to make it pass.


An ideal filter should have uniform and stable gain in the required frequency band and infinite attenuation outside the passband. However, there are some differences in the actual filter distance, so people use various functions to approximate the frequency characteristics of the ideal filter.


SOROTEC which is a professional active harmonic filter manufacturer in China can be a good choice for you, please feel free to contact us!