Meeting users’ requirements:
-COSφ=1.00
-Capacitive and inductive reactive power compensation
-Three-phase unbalance compensation
Static Var Generator | ||
---|---|---|
System parameters | ||
Rated input line voltage | 400/480/690V | |
Input phase voltage range | -20%~+15% | |
Power grid frequency | 50Hz/60Hz ( range: ±10%) | |
Parallel operation | Unlimited | |
Overall efficiency | > 97% | |
Power grid structure | 3P3L/3P4L | |
CT | 150/5 ~ 10,000/5 | |
Performance indicators | ||
compensation capacity | 30/50/100kvar | |
Response time | < 10ms | |
Target power factor | Adjustable from -1 to +1 | |
Cooling mode | Smart air cooling: 220L/sec | Smart air cooling: 405L/sec |
Noise level per module | < 65dB | |
Communications and monitoring capabilities | ||
Communications ports | RS485, CAN, and network port | |
Communications protocols | Modbus and PMBus | |
Alarm | Available | |
Monitoring | Monitoring module, and optional centralized monitoring modules | |
Environment requirement | ||
Altitude | 1500 m. Between 1500 m to 4000 m, according to GB/T3859.2, the power decreases by 1% for every additional 100 m. | |
Operating temperature | -10 ~ 40 | |
Relative humidity | 5%~ 95%, non-condensing | |
Protection class | IP20 (other IP classes are customizable.) | IP20 |
1.Compensation mode
Domestic reactive power compensation devices basically use capacitors for reactive power compensation, the power factor after compensation is generally around 0.8-0.9. Static var generator uses power module to compensate reactive power. The power factor after compensation is generally over 0.98, which is the most advanced power technology in the world.
2.Compensation time
It takes 200 milliseconds for domestic reactive power compensation devices to complete one compensation. Static var generator can complete one compensation in 5-20 milliseconds. Reactive power compensation needs to be completed instantaneously.
3.Stepped and Stepless
Domestic reactive power compensation devices basically adopt 3-10 levels of stepped compensation, each increase or decrease level is tens of thousands of methods, can not achieve accurate compensation. Static var generator can start stepless compensation from 0.1 kF and realize precise compensation completely.
4.Harmonic filtering
Domestic reactive power compensation devices use capacitive type, capacitor itself will amplify harmonics, so it can not filter out harmonics at all. Static var generator does not produce harmonics and will not amplify harmonics, and can filter more than 50% of harmonics.
5.Service life
Domestic reactive power compensation devices are usually controlled by contactors or thyristors, resulting in shorter service life, generally in about three years, large self-loss and frequent maintenance. The service life of static var generator is more than ten years, and the loss itself is minimal and it is basically not maintained.